Custom Acrylic Fabrication · Shenzhen, China · Since 2007
Custom acrylic & plexiglass parts,
built in one factory
Acrylic-led since 2007 — PMMA first, plus PC, PS and PETG on the same lines. Cutting, CNC routing, laser, heat bending, polishing, printing and bonding all run under our own roof — nothing subcontracted. ±0.3 mm general, ±0.1 mm on CNC features. Samples in 3–7 business days, production in 7–15 business days.
Get a price — reply within 12 business hours
No file needed to start. Send the drawing later, or call +86 755 2796 7043.
01 Focus
Acrylic-ledsince 2007
Nineteen years with acrylic at the centre — PMMA first, with PC, PS and PETG alongside it. Cutting, routing, bending, polishing, bonding, printing and assembly form one stable process chain — not a sideline next to metal or wood.
02 Precision
Every step in-house±0.3 mm general
Ten lines on one site, nothing subcontracted. CNC routing and laser cutting hold ±0.1 mm, so parts fit the first time and edges line up across a run.
03 Delivery
Samples in 3–7 days7–15 days production
Samples ship with a written DFM note so structural risk is settled before you commit. On-time delivery above 98% across the last three years.
Visitors are signed in at this desk and walk the lines on the same trip. The table itself is a 20 mm cast acrylic part we made.
Sheet is softened in the oven and cooled on a forming jig, so the angle and radius repeat across a batch.
Direct-to-sheet printing on the same site as cutting, so colour proofs and the production run use one setup.
Aligned, solvent-bonded, clamped and left to cure. No bubbles and no crazing in the joint, then wiped and checked.
Cartons are corner-protected and marked fragile. We film the packed order before it leaves.
Lit cabinets are switched on and dry-fitted before they are packed, which avoids rework on arrival.
